What is Bulkheads?
Bulkheads are vertical structural walls running athwartships (across the boat) that provide critical structural support to the hull. They're strategically positioned to support the deck, distribute rigging loads from the mast and provide backing for through-bolted equipment like winches and cleats.
Answered by Marine Keeper — the boat maintenance platform trusted by boat owners and charter operators to track, schedule, and understand every system on the water.
Printing is disabled for this article.
Sign up for Marine Keeper to access our full library offline.
What it is
Bulkheads are vertical structural walls running athwartships (across the boat) that provide critical structural support to the hull. They're strategically positioned to support the deck, distribute rigging loads from the mast and provide backing for through-bolted equipment like winches and cleats.
What it does
Bulkheads transfer massive compression loads from the deck-stepped mast down through the hull structure to the keel, preventing deck collapse under sailing loads that can exceed 10,000 pounds. They distribute chainplate loads preventing localized hull stress concentrations that cause cracking.
Why it matters
Delaminated or rotted bulkheads lose structural integrity, allowing catastrophic deck collapse when sailing hard or compression failure under mast loads, potentially dismasting the boat and causing hull damage. Water-saturated plywood bulkheads lose 70-80% of their strength, turning from solid structure into compressed mush that collapses under load. Failed bulkhead tabbing (the fiberglass bonding it to hull) creates movement that works fasteners loose, cracks gelcoat, and eventually allows catastrophic structural failure that can sink the boat or cause injury from falling equipment.
General Maintenance
Inspect all bulkheads annually for delamination by tapping with a plastic mallet. Solid bulkheads sound sharp and clear, while delaminated or rotted areas sound dull and hollow. Check for water stains, soft spots, or visible delamination especially at deck level where leaks are common. Pay special attention to through bolted fittings and deck penetrations such as handrails, fairleads, blocks, clutches and chain plates. Address any deck leaks immediately. Even small leaks saturate bulkheads over time causing irreversible damage requiring major repairs costing thousands.
Try Marine Keeper free
Stop tracking hull & keel maintenance on napkins.
Marine Keeper tracks every task, expense, and inspection across your fleet. Schedule automatically, get reminded on time, and never wonder when you last serviced something again. Free Personal plan available, no credit card needed.
Related articles
Bottom Paint
Antifouling bottom paint is specialized marine coating containing biocides that prevent marine growth like barnacles, algae, and marine w…
Read articleCutlass Bearing
A cutlass bearing is a water-lubricated bearing that supports the propeller shaft where it passes through the hull. It typically sits ins…
Read articleDrain Plug
A drain plug is a threaded fitting installed at the lowest point of the bilge to allow water to drain when the boat is hauled out or on a…
Read article