What is Pulpit & Pushpit?
The pulpit is a stainless steel or aluminum tubular railing structure at the bow providing secure handhold area and anchor handling workspace, while the pushpit (stern pulpit) provides similar safety and equipment mounting at the stern.
Answered by Marine Keeper — the boat maintenance platform trusted by boat owners and charter operators to track, schedule, and understand every system on the water.
Printing is disabled for this article.
Sign up for Marine Keeper to access our full library offline.
What it is
The pulpit is a stainless steel or aluminum tubular railing structure at the bow providing secure handhold area and anchor handling workspace, while the pushpit (stern pulpit) provides similar safety and equipment mounting at the stern. They mount to deck or toerail with substantial stainless steel bases through-bolted with backing plates, and often incorporate mounting points for navigation lights, antennas, solar panels and safety equipment.
What it does
Pulpits and pushpits prevent crew from falling overboard during anchoring, sail handling and line work by providing waist-high barriers and secure handholds when working at boat ends where no other support exists. The pulpit provides a safety platform for deploying and retrieving anchors, handling headsail tack and working with bow lines during docking. The pushpit similarly protects crew while providing mounting structure for equipment like radar, wind generators and BBQ grills.
Why it matters
Corroded or compromised pulpit/pushpit mountings pose a real safety hazard. If a crew member places weight on a weakened pulpit, bolt or base failure could result in loss of support and a MOB situation. Loose or degraded mounting bases can progressively enlarge bolt holes, damage deck cores, and admit water, leading to delamination and rot. In that state, the structure may no longer be reliable for load applications like jackline or tether attachment, making safety lines ineffective when most needed.
General Maintenance
At each annual haul-out or inspection, carefully examine pulpit and pushpit mounting bases for looseness, deck cracks and corrosion of through-bolts. Tighten or re-bed hardware using proper marine sealant and reinforced backing where needed. Inspect all welds and tube joints, especially at base intersections, bends, or fittings, for hairline cracks or crevice corrosion. Apply force in multiple directions to each tube: any perceptible flex or wobble suggests mount failure, cracked welds, or deck damage and should be addressed.
Try Marine Keeper free
Stop tracking deck maintenance on napkins.
Marine Keeper tracks every task, expense, and inspection across your fleet. Schedule automatically, get reminded on time, and never wonder when you last serviced something again. Free Personal plan available, no credit card needed.
Related articles
Deck Drains & Scuppers
Deck drains and scuppers are openings and channels that remove water from the deck, cockpit, and other horizontal surfaces to prevent acc…
Read articleDodgers & Biminis
Dodgers, biminis, and canvas enclosures are weather protection systems made from marine-grade fabrics and are supported by stainless stee…
Read articleHatches & Portlights
Deck hatches open upward on hinges or sliding tracks with locking mechanisms, while portlights are usually smaller and either fixed or de…
Read article